Verplas Thermal Round Pipe
Verplas Self-Seal Thermal Round Pipe complete with 1 click and lock duct to duct fitting
Comes in 125mm and 160mm, can be supplied in 1 meter and 2 meter lengths
Please note – all small orders below 20 meters may only be supplied in one-meter lengths (excluding complete orders over £500)
The Verplas Self-Seal Thermal ducting is manufactured from Neopor Reg; graphite impregnated expanded polystyrene (EPS) with infrared absorbers and reflectors which significantly improve the thermal resistance of the material compared with standard EPS.
The Neopor ® material is fully tested to meet the thermal conductivity requirements of BASF – EN13163 to assist with the prevention of condensation and is Flame Retardant to DIN 4102 B1.
Verplas Thermal Ducting has a minimum Density of 25 kg/m³ and therefore achieves a Thermal Conductivity of 0.03 W/mK, which at 20mm thickness, provides a minimum Thermal Resistance or R value of 0.666 m²K/W. This exceeds the current UK Domestic Ventilation Regulation requirements of Part F 2010 Domestic Ventilation Compliance Guide and NHBC Guidance Document Chapter 3.2 which states that the Thermal Resistance of the insulating material should be equivalent to a minimum 25mm of insulating material with a thermal conductivity of 0.04 W/mK which gives a minimum Thermal Resistance requirement of 0.625 m²K/W.EPP
This Pipe can become damaged if stood on or heavy weight is applied.