Verplas Thermal Rectangular Vertical 45° Bend
Verplas Thermal Rectangular Vertical 45°Self-Seal bend complete with click and lock ﬁttings
The Verplas Self-Seal Thermal is manufactured from Neopor Reg; graphite impregnated expanded polystyrene (EPS) with infrared absorbers and reﬂectors which signiﬁcantly improve the thermal resistance of the material compared with standard EPS.
The Neopor ® material is fully tested to meet the thermal conductivity requirements of BASF – EN13163 to assist with the prevention of condensation and is Flame Retardant to DIN 4102 B1.
Verplas Thermal Ducting has a minimum Density of 25 kg/m³ and therefore achieves a Thermal Conductivity of 0.03 W/mK, which at 20mm thickness, provides a minimum Thermal Resistance or R value of 0.666 m²K/W. This exceeds the current UK Domestic Ventilation Regulation requirements of Part F 2010 Domestic Ventilation Compliance Guide and NHBC Guidance Document Chapter 3.2 which states that the Thermal Resistance of the insulating material should be equivalent to a minimum 25mm of insulating material with a thermal conductivity of 0.04 W/mK which gives a minimum Thermal Resistance requirement of 0.625 m²K/W.EPP
Please note that this pipe can be damaged if stood on or heavy weight is applied.
Benefits of working with BPC Ventilation
- Number 1 leading MVHR and ventilation system specialists
- Large range of systems for domestic and commercial applications
- Authorised Verplas distributors
- In-house design service
- Full technical support
- 1000s of products in stock in our own warehouse
- Large showroom with working units on display
- Installer network throughout the UK and Ireland
- All systems comply to all the latest building control regulations