2 x G4 with the option of a M5 pollen intake filter
Controllability
The Lo-Carbon Sentinel Kinetic models have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range
Boost can be achieved with almost any type of sensor or switch including momentary
Integral Humidity Sensor
The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise.The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature
Construction
The outer enclosure is constructed of PVC with the inner body being constructed of EPP
Motors
The unit has 2 x low energy, high efficiency EC/DC motors
Installation
Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation
Accessories
In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.
Ducting
We recommend the use of Semi Rigid Radial ducting, Semi Rigid Duct is a perfect choice for MVHR Heat Recovery System Installations as it provides huge performance benefits whilst dramatically reducing installation time and installation risk on-site
We can also stock and supply Solid Rigid PVC, Galvanised Steel and Thermal EPP (foam) ducting if preferred
Kits
A heat recovery ventilation system is only as good as the ducting used
Following years of heat recovery design and installation BPC Ventilation are now able to provide high quality kits that will provide a quiet and efficient system exceeding building control regulations and are suitable for any competent person to successfully install
The Quiet-Vent radial semi rigid system combines the performance benefits of rigid duct and the installation benefits of flexible duct by treating each room individually with a dedicated 75mm duct run from two manifolds (distribution box) for supply and extract air at the heat recovery unit
Quiet-Vent Semi Rigid Duct is a perfect choice for MVHR Heat Recovery System Installations as it provides huge performance benefits whilst dramatically reducing installation time and installation risk on-site
Specification for the Vent Axia Sentinel Kinetic BH Heat Recovery Unit
Model
Vent Axia Kinetic BH - 443319 / 443319L
Heat Recovery efficiency %
90%
Digital Controller
yes
Boost Switch control
Yes - Momentary
Interactive control
No
Humidity control
Internal and optional external sensor
Airflow rate Max m3/h
280
Airflow rate @ 100Pa m3/h
245
Max dwelling size M2
150 (uk)
Max room extraction
Kitchen plus 4 extraction points
Specific fan power (lowest)
0.59
Dimensions W x H x D (mm)
550 x 550 x 285
Weight
15kg
Filtration
Yes 2 x G4 (optional 1xM5)
Summer Bypass
Yes
Frost protection
Yes
Sound level @3m db.(a)
16 to 39
Mounting
Wall - Floor
Ductwork connections
Top - Sides
Duct Diameter
4 x125mm
Condensate drain
yes
warranty
5-year
Country of manufacture
UK
Heat exchanger
Counterflow heat exchanger (PVC)
Available room sensors
Humidity, Timer, Pir
BMS - KNX
Yes - BMS
SAP Appendix Q
Yes
Fireplace mode
No
Alarm system integration
Yes
Passive House
No
ERP rating
A
SKU
RHS -443319 LHS- 443319L
Delivery
BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.
Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.
Free Delivery
We offer free delivery on any order over £100 to any mainland UK or Ireland address
Worldwide Delivery
Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.
Please contact us to confirm shipping cost and availability.
End-To-End Support Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.
Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.
These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.
We deliver on Service
Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
All deliveries co-ordinated to suit your specific requirements and construction programme.
Delivery Partners
We only use the couriers with the highest standard of service that include