Metal 45° Bend
45° bend metal is constructed of galvanised metal
Features 2 x male spigots, will fit inside flexible hose or round pipe
Can be use with galvanised steel spiral ducting (round metal ducting - P100M-1)
Constructed without rubber seals
Our metal ducting is manufactured in the UK with top quality materials that will supply a durable product suitable for domestic and commercial systems
It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans
It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems
- Manufactured in the UK
- 2 x male fittings - will fit inside flexible hose or round pipe
- Easy to install, just push-fit duct and fittings together
- Compatible with most other manufactures
- Extensive range of fittings, outlets, and grilles available
- Minimum temperature -15°C
- Maximum temperature +60°c
- DW/154 and meets UL94HB flammability standard
- Suitable to use in compliance with Part F Building Regulations.
- Sap Appendix Q
- Airflow performance independently tested by BSRIA or BRE.
Galvanised metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength.
Compatible with most other lead manufacturers for galvanised metal ducting
To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape
- Apply duct sealant to the male fitting
- Push together
- Apply aluminium duct sealing tape over joint
Insulation of Ductwork
It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/ (m.k) or less.
This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.
If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool
It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations
Metal 45° Degree Bend is available in 5 different sizes - 100mm,125mm,150mm,180mm, 200mm
Benefits of working with BPC Ventilation
- Number 1 leading MVHR and ventilation system specialists
- Large range of systems for domestic and commercial applications
- Authorised distributors
- In-house design service
- Full technical support
- 1000s of products in stock in our own warehouse
- Large showroom with working units on display
- Installer network throughout the UK and Ireland
- All systems comply to all the latest building control regulations
- Technical Specification
45' Bend Metal Technical Specification
Round System (mm)
Temp Max (°C)
EAN - Barcode
BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.
Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.
We offer free delivery on any order over £200 to any mainland UK or Ireland address
Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.
Please contact us to confirm shipping cost and availability.
Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.
Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.
These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.
We deliver on Service
- Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
- All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
- All deliveries co-ordinated to suit your specific requirements and construction programme.
We only use the couriers with the highest standard of service that include
- Liam Connolly (Roadfreight) Ltd
- Speedy Freight