Vent Axia HR100RS Heat Recovery System Kit

Vent Axia HR100RS Complete DIY heat recovery system Kit of a MVHR unit with insulated aluminium flexible ducting

This Kit should have everything you should require to install the system

Please note - 

You can purchase the heat recovery unit with or without the ductwork on this listing and the Unit and room ducting kits include the heat recovery unit

This kit can amended if required (please contact us)

MAIN KIT FEATURES:

• All products in kits can be changed to suit your specific needs
• Worldwide Delivery is available 
• Free Technical support by our in-house technical team (multiple telephone lines)
• The systems are suitable for any competent person to install 
• Kits and products are in stock ready for delivery
• Any products not required can be returned (excluding return delivery cost)
• Any extra products required will be discounted to the Kit Price (excluding delivery)
• Price Guarantee - We will guarantee the lowest cost for this top quality system

Vent Axia HR100RS

Vent Axia HR100RS is a heat recovery unit that is ideal for applications such as single bedroom/bathrooms in nursing homes, residential care homes and hotel rooms. It features bottom access and is ideal for installation on ceiling slabs above a suspended ceiling.

The unit has a maximum capacity of up to 180 l/s (64m3h/r). It is suitable for use in bathrooms and small internal rooms, providing superior control of odours and condensation.

The HR100RS features an integral heat exchanger, it transfers heat from the outgoing extracted stale air to the fresh supply of air. This raises the supply air temperature while at the same time the relative humidity is reduced.

Please note - You can purchase the heat recovery unit with or without the ductwork on this listing and the Unit and room ducting kits include the heat recovery unit

KEY FEATURES:

• An ideal unit for one bedroom and bathroom
• Supply and extract air ventilation with heat recovery
• Thermal Efficiency up to 70%
• Boost operation with wall switch
• Extracts up to 40 m³/hr @ 50 Pa
• Suitable for houses up to 40 m²
• Dimensions: 305mm x 160mm x 250mm (L x H x W)
• Ducting: 100mm   

Filtration

Fresh air is filtered with two filters

Controllability

The unit comes fitted with a single 2-speed motor and provides continuous low volume ventilation with a boost option. The unit is supplied without controls to allow the unit to be tailored to any requirement. There is a range of control devices that are available for both automatic or manual speed control, a relay is required if using a light or PIR fitting.

Features

This unit is suitable for room sizes up to 40 m², and is able to extract from 1 wet room

Construction

The enclosure is constructed of powder coated galvanised metal

Motors

The unit has 2 x low energy, high efficiency a/c fan/motors

Installation
The HR100RS is compatible with 100mm diameter flexible ducting, it fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

Benefits of working with BPC Ventilation

• Number 1 leading MVHR and ventilation system specialists
• Large range of systems for domestic and commercial applications
• Authorised Vent-Axia distributors
• In-house design service
• Full technical support
• 1000s of products in stock in our own warehouse
• Large showroom with working units on display
• Installer network throughout the UK and Ireland
• All systems comply to all the latest building control regulations

HR100RS Ducting Kit

HR100 Technical Data

BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.

Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.

Free Delivery

We offer free delivery on any order over £200 to any mainland UK or Ireland address

Worldwide Delivery

Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.

Please contact us to confirm shipping cost and availability.

End-To-End Support

Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.

Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.

These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.

We deliver on Service

• Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
• All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
• All deliveries co-ordinated to suit your specific requirements and construction programme.

Delivery Costs

Please click here to view delivery costs

Delivery Partners

We only use the couriers with the highest standard of service that include

• DPD
• Parcelforce
• Liam Connolly (Roadfreight) Ltd
• Importwise
• Speedy Freight