Caladair Commercial Hexamotion Heat Recovery Ventilation Unit
Please Note – These units are built to order
For a lead time on these Caladair Hexamotion Commercial Units please contact our sales team on 028 2827 5150
Hexamotion are self-regulating and highly efficient heat recovery ventilation units. They are compact units with a high performance providing up to 80% heat recovery and air flow rates of 100-8000 m3/h across the range of 9 different units.
Hexamotion heat recovery units are part of the Caladair Econological solution programme and are manufactured to improve indoor air quality. Hexamotion heat recovery units are monobloc compact with lateral connection, plug & play and communicating heat recovery ventilation unit.
- Airflow rates from 100 to 8000 m3/h
- Heat recovery efficiency up to 80%
- Self-regulating plug & play
- Air filtration, temperature control and climate comfort
- Multilingual communication
- High-performance variable speed rotary heat exchanger
- Suitable for office and industrial applications
- Low noise level for better acoustic comfort
- Cold recovery
- Heat recovery
- Night time cooling
Model Length (mm) Width (mm) Height (mm) 05 1215 675 805 08 1345 805 925 15 1500 805 925 20 1525 885 1005 27 1730 975 1205 35 1730 1140 1205 45 1860 1265 1495 60 2050 1465 1495 80 2260 1545 1645
Hexamotion units are available in 5 different regulation programmes, all available with right or left access depending on airflow direction.
Season: Designed for temperate climate zones, Season Hexamotion provides air renewal with efficient energy recovery, summer/winter operating of the rotary heat exchanger wheel and adjustable flow rates by potentiometer.
First: Self-regulation unit for temperate climates, with active temperature management for optimal energy consumption and thermal comfort.
Premium Co: FIRST features, but also equipped with a changeover water coil for low outdoor temperatures down to -20°C.
Premium DXR: FIRST features also with a changeover R410A coil for low outdoor temperatures down to -20°C.
Premium BE: FIRST features and also equipped with an electric heater for low outdoor temperatures down to -20°C.
Hexamotion has 6 choices of flow rate modulation for optimised energy consumption
SEASON: Adjustment of each fan rotation speed by potentiometers mounted and connected in the control system board.
For versions FIRST and PREMIUM, the EASY regulation can control the fans in the following modes:
Eco: Fans speed adjustment via 2 airflow settings (LS-HS) in the EASY regulation.
Lobby®: Airflow rate modulation with CONSTANT PRESSURE mode, adjustable for each fan.
Diva®: Proportional modulation of each fan airflow depending on the CO2 rate. Sensor integrated in the exhaust air inlet.
Mac2®: Modulation in constant airflow for each fan (LS and HS) (except sizes 05 and 08). Pressure transmitters integrated inside the unit.
Quattro®: Proportional modulation in constant airflow for each fan depending on the CO2 rate (except sizes 05 and 08). Pressure transmitters and CO2 sensor (exhaust air inlet) integrated in the unit. Setting of the LS, the HS and the CO2 minimum rate (ppm) adjustable on site directly on the easy regulation.
LCD controller functions:
- Temperature control
- Timer commissioning
- Night over ventilation
- Local controls
- Default readings
Hexamotion units as standard include highly efficient F7 opacimetric filters for both the fresh air and exhaust air. Filters are mounted on slides for easy replacement and are fitted with draught-proof sealing ensuring efficient airtightness. Additional filters for the supply air are an optional extra.
- Constructed of 10/10e outdoor panels
- Insulated with 50mm high density M0 A1 mineral wool
- External panels are painted with RAL 7035 with a protective film
- Internal panels constructed of galvanised steel
- Circular connectors with lip seals for airtightness guarantee
- Access by doors mounted on hinges for easy maintenance
Caladair Hexamotion units feature highly efficiency aluminium rotary heat exchanger. The heat exchanger is situated in a rigid frame mounted on a slide rack for easy removal and maintenance.
The heat exchanger provides heat recovery efficiency high than 80%. It has a variable speed that enables improvement especially during midseason.
Hexamotion units are equipped with low energy consumption motors, each unit features 2 EC motors.
Hexamotion units can be installed both indoors or outdoors. Hexamotion units have a compact design with a small footprint. Duct connections are situated on the side of the unit with double lip circular connectors for an airtight, quick and cost-effective installation with no adapters required.
Top panel integrating a rooftop for indoor and outdoor installation as standard.
Insulation of Ductwork
We recommend you use Metal Spiral ducting and fittings due to superior strength.
To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using self-sealing fittings or a combination of Ducting Sealant and Aluminium Duct Sealing Tape.
- Apply Duct Sealant to the male fitting
- Push together
- Apply Aluminium Duct Sealing Tape over joint
It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less.
This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.
If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool
It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations.
Hexamotion models are compatible with a range of ducting systems. A full range of controls, sensors, silencers and valves/diffusers are also available to complete installation of your ventilation system.
2-year parts guarantee.
Benefits of working with BPC Ventilation
- Number 1 leading MVHR and ventilation system specialists
- Large range of systems for domestic and commercial applications
- Authorised Caladair distributors
- In-house design service
- Full technical support
- 1000s of products in stock in our own warehouse
- Large showroom with working units on display
- Installer network throughout the UK and Ireland
- All systems comply to all the latest building control regulations
- Technical Specification
Caladair Hexamotion 05 / 08 / 15 / 20 / 27 / 35 / 45 / 60 / 80
Heat Recovery efficiency %
Up to 80%
Airflow rate Max m3/h
100 - 8000
Airflow rate @ -Pa m3/h
750 - 7700 @ 200Pa
Max dwelling size M2 @.3 ACH
Max dwelling size M2 @ .5ACH
Max room extraction
Meets European requirements
Specific fan power (lowest)
175 - 790 Kg
2 x F7
Pre/ Post Heater
Sound level @3m db.(a)
46 - 80
2 rear – 2 front ductwork connections
Duct Diameter (mm)
4 x side connections 200 / 250 / 355 / 400 / 450 / 500 / 630 / 630 /1100 x 606
Premium Co & DXR – side outlet
2 years: parts only
Country of manufacture
Rotary heat exchanger
External remote-control LCD display
Boost Switch control
No (optional timer box)
Interactive App Control
Internal Humidity control
Available room sensors
Outdoor air, building ambient, fresh air
SAP Appendix Q
Alarm system integration
- Download Documentation
Heat RecoveryCaladair Hexamotion Product Catalogue
- Further Information
Flow Rates and Configuration
BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.
Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.
We offer free delivery on any order over £200 to any mainland UK or Ireland address
Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.
Please contact us to confirm shipping cost and availability.
Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.
Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.
These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.
We deliver on Service
- Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
- All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
- All deliveries co-ordinated to suit your specific requirements and construction programme.
We only use the couriers with the highest standard of service that include
- Liam Connolly (Roadfreight) Ltd
- Speedy Freight